GW-40C Steel Bar Bending Testing Machine

I、Overview of steel bar bending testing machine:

1. Steel bar bending testing machine is a special equipment for cold bending test and plane and reverse bending test of steel bars. Its main technical parameters meet the test requirements of steel for reinforced concrete Part 2: hot rolled ribbed bars (gb1499.2-2018), hot rolled ribbed bars for reinforced concrete (Yb / T 4828-2020), four sided ribbed bars for reinforced concrete (Yb / T 4657-2018), stainless steel bars for reinforced concrete (Yb / T 4362-2014) and bending test methods for metallic materials (GB / T 232-2010), And the provisions and requirements of ISO 15630-1-2019 on cold bending test and plane reverse bending test. This equipment is an ideal test equipment for steel mills and construction units to test the bending and reverse bending properties of reinforcement.

2. The steel bar bending testing machine has the characteristics of compact structure, simple operation, intuitive display of bending angle, easy maintenance, stable operation, safety and low noise. This equipment is an ideal test equipment for steel mills and construction units to test the bending and reverse bending properties of reinforcement.

3. Installation requirements: it shall be installed on a stable basis, and the levelness error shall be ≤ 0.5/1000; Connected to three-phase four wire, 50Hz, 380V power supply.

4. Advantages: compared with the vertical steel bar bending testing machine, this machine has the characteristics of low center of gravity and convenient transportation.

II、Technical parameters of steel bar bending tester:

1. Diameter range of bending reinforcement:         φ 6- φ 40mm

2. Positive bending angle:        0 - Any setting within 180 °

3. Reverse bending angle:     Any setting within 0-180 °

4. Working disc speed:      1.4r/min

5. Motor power:    1.5kW

6. Machine shape:     one thousand and two hundred × seven hundred and fifty × 1000（mm）

7. Machine weight:     400kG

 For more detailed parameters and technical data, please consult the technical or Sales Department of the company.